14
14
|
Setting Up the SpectroProofer
6. Attach the tile holder to the printer. Insert the two tabs on the bottom of
the holder into the slots on the printer. Then press the holder flush
against the printer so its latch clicks into place. (The two tabs on the left
side of the holder will rest on top of the backer plate.)
7. Install the SpectroProofer in the printer by sliding it onto the mounting
rails.
Warning:
The SpectroProofer is
heavy. Two persons are
required to lift it.
Summary of Contents for Stylus Pro 7900
Page 1: ...Setup and Maintenance...
Page 4: ...4 4 Contents...
Page 6: ...6 6 Introduction...
Page 20: ...20 20 Setting Up the SpectroProofer...
