8
8
|
Setting Up the SpectroProofer
2. Remove any tape and protective material from the outside surface of the
SpectroProofer.
3. Remove any tape from the paper presser, shown below. Raise the paper
presser and remove its packing material.
4. Remove any packing tape from the carriage.
Caution:
Check for packing material
all around and under the
paper presser.
Paper presser (under packing material)
Remove the
packing material
Summary of Contents for Stylus Pro 7900
Page 1: ...Setup and Maintenance...
Page 4: ...4 4 Contents...
Page 6: ...6 6 Introduction...
Page 20: ...20 20 Setting Up the SpectroProofer...
