background image

e X a c t   A u t o - S c a n   S y s t e m  

2

 

Proprietary Notice 

The information contained in this manual is derived from patent and proprietary data of X-Rite, 

Incorporated. The contents of this manual are the property of X-Rite, Incorporated and are copyrighted. 

Any reproduction in whole or part is strictly prohibited. Publication of this information does not imply 

any rights to reproduce or use this manual for any purpose other than installing, operating, or 

maintaining this instrument. No part of this manual may be reproduced, transcribed, transmitted, stored 

in a retrieval system, or translated into any language or computer language, in any form or by any 

means, electronic, magnetic, mechanical, optical, manual, or otherwise, without the prior written 

permission of an officer of X-Rite, Incorporated. 

This product may be covered by one or more patents. Refer to the instrument for actual patent numbers. 

Copyright © 2019 by X-Rite, Incorporated “ALL RIGHTS RESERVED” 

X-Rite® is a registered trademarks of X-Rite, Incorporated. All other logos, brand names, and product names mentioned are the properties of 

their respective holders. 
 

Warranty Information 

X-Rite warrants this Product against defects in material and workmanship for a period of twelve (12) 

months from the date of shipment from X-Rite’s facility, unless mandatory law provides for longer 

periods.  During such time, X-Rite will either replace or repair at its discretion defective parts free of 

charge.  
X-Rite’s warranties herein do not cover failure of warranted goods resulting from:  (i) damage after 

shipment, accident, abuse, misuse, neglect, alteration or any other use not in accordance with X-Rite’s 

recommendations, accompanying documentation, published specifications, and standard industry 

practice; (ii) using the device in an operating environment outside the recommended specifications or 

failure to follow the maintenance procedures in X-Rite’s accompanying documentation or published 

specifications; (iii) repair or service by anyone other than X-Rite or its authorized representatives; (iv) 

the failure of the warranted goods caused by use of any parts or consumables not manufactured, 

distributed, or approved by X-Rite; (v) any attachments or modifications to the warranted goods that are 

not manufactured, distributed or approved by X-Rite.  Consumable parts and Product cleaning are also 

not covered by the warranty. 
X-Rite‘s sole and exclusive obligation for breach of the above warranties shall be the repair or 

replacement of any part, without charge, which within the warranty period is proven to X-Rite‘s 

reasonable satisfaction to have been defective.  Repairs or replacement by X-Rite shall not revive an 

otherwise expired warranty, nor shall the same extend the duration of a warranty.  
Customer shall be responsible for packaging and shipping the defective product to the service center 

designated by X-Rite.  X-Rite shall pay for the return of the product to Customer if the shipment is to a 

location within the region in which the X-Rite service center is located. Customer shall be responsible for 

paying all shipping charges, duties, taxes, and any other charges for products returned to any other 

locations.  Proof of purchase in the form of a bill of sale or receipted invoice which is evidence that the 

unit is within the Warranty period must be presented to obtain warranty service.  Do not try to 

dismantle the Product.  Unauthorized dismantling of the equipment will void all warranty claims.  

Contact the X-Rite Support or the nearest X-Rite Service Center, if you believe that the unit does not 

work anymore or does not work correctly.   
THESE WARRANTIES ARE GIVEN SOLELY TO BUYER AND ARE IN LIEU OF ALL OTHER WARRANTIES, 

EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF 

MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR APPLICATION, AND NON-INFRINGEMENT.  

NO EMPLOYEE OR AGENT OF X-RITE, OTHER THAN AN OFFICER OF X-RITE, IS AUTHORIZED TO MAKE ANY 

WARRANTY IN ADDITION TO THE FOREGOING. 

Summary of Contents for PANTONE exact Auto-Scan

























Reviews: