O P E R A T I O N
4-9
instrument’s film roll location. For additional information on
transferring stored images, refer to the ImageLink on-line guide
for details.
To instantaneously transfer images:
1.
Make sure the instrument is interfaced to the computer (see
section 1 for connections) and the software connection is
activated.
2.
Press the
Center
key to turn on the instrument.
3.
Enable
Frame Store
option as previously explained in
Storing Images.
The status bar should show the connection icon as active.
(active connection)
(inactive connection)
If active image does not appear, refer to the ImageLink on-line
guide for troubleshooting tips.
4.
Take a measurement as normal. Image data is transferred
to the computer.
