O P E R A T I O N
4-5
Zoom Mode
The graphical dot image can be zoomed for easier viewing. The
image that can be zoomed is the last dot measurement taken
with the instrument. Because the zoomed image is larger than
the display screen, you can use the left and right keys to scroll
the image to the correct viewing position. The instrument
supports two times (x2), four times (x4) and eight times (x8)
zoom modes.
To zoom on a dot measurement:
1.
Press the
Center
key to turn on the instrument.
NOTE:
Hold the Center key down for 2 seconds if a charging
message is displayed.
2.
Take a dot measurement.
3.
Press the
Left
key to advance to the secondary screen.
4.
Make sure the flashing highlight is on the
zoom factor
icon (x2, x4 or x8) and press the
Right
key
to select
desired zoom factor.
5.
Using the
Left
key
, move the flashing highlight to the
zoom tool
icon
.
