E D I T I N G I N S T R U M E N T U T I L I T I E S
3-3
Local Electrical Supply Frequency
The instrument’s electrical supply can be set at 50 hertz or 60
hertz line frequency.
NOTE:
This setting is used to “synchronize” the instrument with the
frequency of “flicker” when a light table is used for transmission
measurements from film. Setting this option to the incorrect level will
make transmission dot measurements inaccurate, but will not damage
your instrument.
1.
Using the
Left
key
, move the flashing highlight to the
Frequency
icon
or
.
2.
Press the
Right
key
to toggle between the two
options.
Feature Upgrade
Your instrument can be upgraded with new features by entering
a new key code obtained from X-Rite.
1.
Using the
Left
key
, move the flashing highlight to the
Key
icon
.
2.
Press the
Right
key
to access the key code entry
screen. Make a note of the existing key code number in
case it needs to be entered at a later time.
3.
Enter the first digit/character of the new key code number
obtained from X-Rite by pressing the
Right
key
to
advance to the correct digit/character.
Existing key code
