O V E R V I E W A N D S E T U P
1-3
NOTE:
A fast charge may be manually invoked if desired. Refer to
Fast Charge Mode in Section 3 for additional information.
Battery Indicator Status
The battery icon located in the status bar displays the following
conditions.
Indicates the battery is fully charged.
Indicates the battery has sufficient charge for a substantial
number of measurements.
Indicates the battery is low and will provide approximately
50 additional measurements.
(icon flashing) Indicates the battery is extremely low and
must be charged immediately.
Attaching the AC Adapter
1.
Verify that the voltage indicated on the adapter complies
with the AC line voltage in your area. If not, contact
X-Rite or an authorized representative.
NOTE
: Older X-RiteDot models, labeled ccDot4 and earlier use a
different AC adapter than the newer ccDot5 and X-RiteDot models.
Never use your X-RiteDot power supply with an older ccDot4
model or you will permanently damage the ccDot 4 instrument.
2.
Insert the mini-DIN plug from the interface cable into the
back of the instrument.
3.
Insert the small plug from the adapter into the power-input
of the DB9 plug on the interface cable.
4.
Plug the appropriate detachable line cord into the adapter
and then plug the line cord into an AC wall receptacle.
Instrument I/O Serial Interface
Your instrument connects to a PC or Mac computer using a
serial RS-232 interface cable. To connect to a Mac, you will
need to purchase an optional serial adapter or USB converter.
Mini-DIN
Interface Cable
DB9 Plug
AC Adapter Plug
