CAPSURE User Manual
2
Equipment Information
Use of this equipment in a manner other than that specified by X-Rite, Incorporated may
compromise design integrity and become unsafe.
Warning: This instrument is not for use in explosive environments.
No user serviceable parts in this product.
For your safety, do not look directly into the measurement optics when the instrument is on.
Do not immerse the instrument in liquid.
Cold weather may affect the speed of the display and the accuracy of matches.
Do not expose the instrument to extreme heat; do not leave in the sun.
Transportation: This product contains a lithium-ion battery. Should you need to ship this
device, you may wish to consult published
guidance documents
by one or more of these
organizations for advice on how to comply with the regulations: IATA, ICOA, IMDG & PHMSA.
The single cell battery contained in the CAPSURE device is 25g in weight, 3.7V, 1030mAh, and
complies with the UN 38.3 tests in effect the year it was originally shipped.
Instructions for disposal: Please dispose of Waste Electrical and Electronic Equipment (WEEE) at
designated collection points for the recycling of such equipment.
CE Declaration
Hereby, X-Rite, Incorporated, declares that this RM200 Series is in compliance with the
essential requirements and other relevant provisions of Directive(s) 2014/30/EU (EMC),
2014/35/EU (LVD), and RoHS 2011/65/EU.
Bluetooth equipped devices additional comply with R & TTE 1999/5/EC.
FCC Notice
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
Summary of Contents for capsure
Page 1: ...User Manual ...
