X-Rite AutoScan DTP41 Series, Operator'S Manual

Page: 14 / 18

General Maintenance
7
4.
Clean base surface, bottom plate surface, idler rollers, and drive wheels with a lint-free cloth.
NOTE: To thoroughly clean the entire drive wheel, press the Instrument button—with instrument plugged in—to rotate
wheels. DO NOT press button with instrument setting flat on Bottom Plate Surface, drive wheels may move instrument.
5.
Position Base Assembly over Bottom Plate and insert tabs into openings. The Base is positioned properly when it
snaps into place. When reassembling a transmission unit (DTP41/T), make sure the optics connector is properly
seated before snapping into place.
CLEANING THE REFERENCE STRIP
The calibration reference strip can be cleaned with a lint free cloth whenever required. Make sure to return reference
strip to its protective case when finished.
If required, a new reference strip can be ordered from X-Rite, Part Number DTP41-100-KIT.
Always handle reference strip by the edges.
Serial Number Label
Idler Rollers
Idler Rollers
Idler Rollers
Bottom Plate
Surface
Base Surface
Drive Wheels
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com