8
4
Appendices
TECHNICAL SUPPORT
The AutoScan Spectrophotometer is used with a number of third party software vendors. To get the most specialized
technical assistance, you should
first
contact the technical service representative for the specific third-party software
that you are using.
Before contacting X-Rite with a potential instrument problem, you should perform a complete instrument reset. This
reset will reinitialize the instrument’s firmware and reinstate the factory default settings. To perform reset, unplug the
instrument’s power. Press and hold the instrument button and plug-in power. Release button after LED starts to flash
red (approx. 3 seconds).
If you are still having a problem after performing a reset, contact X-Rite Customer Service toll-free by phone at:
1-888-826-3059; or by fax at: 1-888-826-3061.
Our Customer Service Department is fully staffed with qualified technicians to assist you via phone or fax. When
placing a call, please have the following information close at hand:
Your instrument serial number (located on the Bottom Plate, see Cleaning the Strip Reading Mechanism for
location) and calibration reference serial number
Your utility software version number
Your name and company name
Your telephone number
Write down any error messages and what prompted them
Have the hardware and software running within reach of the telephone
INSTRUMENT SPECIFICATIONS
Measurement Geometry:
45°/0° per ANSI/ISO 5-4 (IT2.17) (Reflection)
180°/0° per ANSI/ISO 5-2 (IT2.19) (Transmission)
Spot Size at Sample:
1.8mm (.070 in) in scan direction, 2.5mm (.097 in) wide
Light Source:
Gas
Pressure
@
2850
°
K
Spectral Sensor:
DRS Technology, 24 point engine, 31 point reporting
Spectral Range:
400nm to 700nm
Illuminant Types:
A, C, D50, D55, D65, D75, F2, F7, F11, & F12
Standard Observers:
2° & 10°
Response Type:
Status T, E, I, A, M, & Others
Measurement Time:
Approx. 0.25 seconds per patch (7mm patches)
Reflection Measurement (DTP41 & DTP41/T)
Inter-instrument Agreement:
0.3
Δ
E cmc avg typical (avg, based on 12 BCRA tiles)
Measurement Range:
0.00D to 2.50 D; 0 to 160% R
Repeatability on White:
0.2
Δ
E max; ±0.01D max
Linearity:
+/-
.01D
or
1%
Transmission Measurement (DTP41/T)
Inter-instrument Agreement:
0.02D or 2% typical, 0 to 3.0 D
Measurement Range:
0.00D to 5.00 D; 0 to 110% T
Repeatability:
±0.01D or 1% 0 to 3.5 D (Visual)
Calibration:
Calibration
strip
for
Reflection
Environmental:
+10 (50 F) to +40
°
C (104 F) operating,
30% to 85% RH non condensing
Warm Up time:
None
Power Required:
12v DC, Universal 100-240VAC Adapter; 50/60Hz
Dimensions:
Height: 88mm (3.45 in); Width: 184mm (7.25 in); Depth: 114mm (4.5 in)
Weight:
890g (1.96 lb) , with /T option 1090g (2.40 lb)
These specifications are subject to change without notice.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Summary of Contents for AutoScan DTP41 Series
Page 3: ...Artisan Technology Group Quality Instrumentation Guaranteed 888 88 SOURCE www artisantg com ...
Page 7: ...Artisan Technology Group Quality Instrumentation Guaranteed 888 88 SOURCE www artisantg com ...
Page 16: ...Artisan Technology Group Quality Instrumentation Guaranteed 888 88 SOURCE www artisantg com ...
