X-Rite AutoScan DTP41 Series, Operator'S Manual

Page: 13 / 18

6
3 General Maintenance
REPAIR INFORMATION
The X-RiteColor AutoScan Spectrophotometer is covered by a one-year limited warranty and should be referred to the
factory or an authorized service center for repairs within the warranty period.
X-Rite provides a factory repair service to their customers. Because of the complexity of the circuitry, all repairs
should be referred to the factory or an authorized service center.
X-Rite will repair any instrument past warranty. The customer shall pay shipping and repair cost to the factory or
authorized service center, and the instrument shall be submitted in the original carton, as a complete unaltered unit.
CLEANING THE INSTRUMENT
Your instrument requires very little maintenance to achieve years of reliable operation. However, to protect your
investment and maintain reading accuracy, a few simple-cleaning procedures should be performed from time to time.
General Cleaning
Whenever required, the exterior of the instrument may be wiped clean with a cloth dampened in water or mild cleaner.
NOTE: DO NOT use any solvents to clean the unit, this will cause damage to the cover.
Cleaning the Strip Reading Mechanism
The reading mechanism should be cleaned once a week in normal environments, and more often in dirty or dusty
environments.
1.
Turn instrument upside-down.
2.
Using your index finger and thumb, pinch the two tabs on the bottom of the base assembly towards each other.
3.
Holding the tabs, lift base assembly upward.
Base Tabs
Base Assembly
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com