Würth RL 2-14
38
Troubleshooting
en
Troubleshooting
Problem
Possible Cause(s)
Suggested Solutions
The RL 2-14 is working,
but not self-levelling.
The RL 2-14 is in Manual
Mode.
The RL 2-14 must be in Automatic Mode to self-level.
Set the RL 2-14 to Automatic Mode by pressing the
Automatic/Manual Mode button.
– In Automatic Mode the X-axis LED and the Y-axis
LED flash green while levelling.
– In Manual Mode the X-axis LED and/or the Y-
axis LED are red.
RL 2-14 does not turn on. The batteries are low or dead. Check the batteries and change or charge the
batteries if necessary. If the problem continues, return
the RL 2-14 to an authorised service centre for
service.
The distance of the laser
is reduced.
Dirt is reducing the laser
output.
Clean the windows of the RL 2-14 and the receiver. If
the problem continues, return the RL 2-14 to an
authorised service centre for service.
The laser receiver is not
working properly.
The RL 2-14 is not rotating. It
may be levelling or in Elevation
Alert.
Check for proper operation of the RL 2-14.
)
Refer to the receiver manual for more infor-
mation.
The receiver is out of usable
range.
Move closer to the RL 2-14.
The batteries of the receiver
are low.
Change the receiver batteries.
Summary of Contents for RL 2-14
