Würth RL 2-14, User Manual

Page: 84 / 100

Würth RL 2-14
32
Accuracy Adjustment
en
5 Accuracy Adjustment
About
• It is the responsibility of the user to follow operating instructions and to periodically check the accuracy of the
laser and work as it progresses.
• The RL 2-14 is adjusted to the defined accuracy specification at the factory. It is recommended to check the
laser for accuracy upon receipt and periodically thereafter to ensure accuracy is maintained. If the laser
requires adjustment, contact your nearest authorised service centre or adjust the laser using the procedures
described in this chapter.
• Only enter the accuracy adjustment mode when you plan to change the accuracy. Accuracy adjustments
should only be performed by a qualified individual that understands basic adjustment principles.
• It is recommended to perform this procedure with two people on a relatively flat surface.
5.1 Checking the Level Accuracy
Checking the level accu-
racy step-by-step
Step Description
1. Place the RL 2-14 on a flat, level surface or tripod approximately 30 m (100 ft) from a wall.
007023_001
30 m (100 ft)
30 m (100 ft)
X+
X—