Würth RL 2-14, User Manual

Page: 85 / 100

Würth RL 2-14
33
Accuracy Adjustment
en
)
The RL 2-14 is within its accuracy specification if the four marks are within ± 3 mm (± 1/8”) from the
centre.
2. Align the first axis so that it is square to a wall. Allow the RL 2-14 to self-level completely (approxi-
mately 1 minute after the RL 2-14 begins to rotate).
3. Mark the position of the beam.
4. Rotate the laser 180° and allow it to self-level.
5. Mark the opposite side of the first axis.
6. Align the second axis of the RL 2-14 by rotating it 90° so that this axis is square to the wall. Allow
the RL 2-14to self-level completely.
7. Mark the position of the beam.
8. Rotate the laser 180° and allow it to self-level.
9. Mark the opposite side of the second axis.
Step Description
007024_001
30 m (100 ft)
30 m (100 ft)
Y+
Y—