Würth RL 2-14, User Manual

Page: 75 / 100

Würth RL 2-14
23
Operation
en
3.5 Manual Mode
Description of the Manual
Mode
After start-up the Manual Mode can be activated. In Manual Mode the self-levelling will be deactivated. The
following options are available:
• Change the X-axis to Manual Mode
• Change the Y-axis to Manual Mode
• Change to Full Manual Mode
)
After turning the RL 2-14 off and on again, the RL 2-14 is in Automatic Mode.
Changing the X-axis to
Manual Mode
After startup, press the Automatic/Manual Mode Button once to change the X-axis to Manual Mode.
)
The X-axis and Y-axis are marked on the top of the RL 2-14.
• The X-axis does not self-level and a slope can be entered in this axis using the Up and Down Arrow buttons
on the RL 2-14.
• The X-axis LED is red.
• The Y-axis continues to self-level and the Y-axis LED flashes green until level.
When the X-axis is in Manual Mode, the X-axis can be sloped upwards or downwards as illustrated.
007014_001