Würth 0700 622 X, Translation Of The Original Operating Instructions

Page: 14 / 185

14
Intended Use
The machine is intended for driving in and loosening screws
and bolts as well as for tightening and loosening nuts within
the respective range of dimension.
The light of this power tool is intended to illuminate the power
tool’s direct area of working operation and is not suitable for
household room illumination.
For damage caused by usage other than intended, the user is
responsible.
Product Features
While reading the operating instructions, unfold the graphics
page for the machine and leave it open.
The numbering of the product features refers to the illustration
of the power tool on the graphics page.
1 Screwdriver bit with ball catch*
2
Tool holder
3 Locking sleeve
4
“PowerLight”
5 Fixture for carrying strap
6
Battery unlocking button*
7 Battery pack*
8
Rotational direction switch
9 On/Off switch
10
Battery charge-control indicator
11 Handle (insulated gripping surface)
12
Universal bit holder*
13 Screwdriver bit*
* The accessories illustrated or described are not
included as standard delivery.
Tool Specifications
Noise/Vibration Information
Measured sound values determined according to EN 60745.
Typically the A-weighted noise levels of the product are:
Sound pressure level 87 dB(A); Sound power level 98 dB(A).
Uncertainty K =3 dB.
Wear hearing protection!
Vibration total values a
h
(triax vector sum) and uncertainty K
determined according to EN 60745:
Impact tightening of fasteners of the maximum capacity of the
tool: a
h
=9 m/s
2
, K =1.5 m/s
2
.
The vibration emission level given in this information sheet has
been measured in accordance with a standardised test given
in EN 60745 and may be used to compare one tool with
another. It may be used for a preliminary assessment of expo-
sure.
The declared vibration emission level represents the main
applications of the tool. However if the tool is used for differ-
ent applications, with different accessories or poorly main-
tained, the vibration emission may differ. This may significantly
increase the exposure level over the total working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working
period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep hands warm, organise work patterns.
Declaration of Conformity
We declare under our sole responsibility that the product
described under “Tool Specifications” is in conformity with the
following standards or standardization documents:
EN 60745 according to the provisions of the directives
2009/125/EG (Regulation 1194/2012), 2011/65/EU,
2004/108/EC, 2006/42/EC.
Cordless Impact Screwdriver ASS 10-A
Art. No. 0700 622 X
Rated voltage V= 10.8
No-load speed min
-1
0 – 2600
Impact rate min
-1
0 – 3100
Maximum torque, hard screw-
driving application according
to ISO 5393 Nm 105
Bolt size M4 – M12
Max. screw dia. mm 8
Tool holder ¼" hexagon
socket
Weight according to
EPTA-Procedure 01/2003 kg 1.0
Cordless Impact Screwdriver ASS 10-A
OBJ_BUCH-1523-002.book Page 14 Thursday, June 27, 2013 10:34 AM