Number of tracks played successively on the same disc
OMT CD – Edition: 13.08.2007
33
10
Further programming options
10.1 Number of tracks played successively on the same disc
The display shows the maximum number of tracks played successively from the same disc if more
tracks have been selected. Preset value = 04 tracks, i.e. after four tracks from this CD it will be
taken back to the carrier, and the next CD stored in the selection memory will be played. If
selections for the previous CD still exist, they will be played later.
This option to limit the tracks played from one CD is more useful for operators. For individual use
this value can be set up to 25.
To change this value (service program, level 2) :
1.
Set the slide switch ‘service’ at the SCC-unit to ON.
2.
Press ‘LT’ button.
3.
Press selection button 4 -hold down- and press selection button R than release both buttons.
Service level 2 is reached. Display is dark.
4.
Press selection button 3, the display shows e.g.:
#
04 is factory pre-set for number of tracks played successively on
the same disc.
To programme
press selection button 3 - hold - and press selection button R. The digital display
goes dark. Enter the desired setting by means of the selection buttons with two digits.
Possible settings: 01 - 25.
If you set this value to 01 all selections will be played in selection
order.
To check the settings: Press selection button 3 again.
Exit the service program:
1.
Set the slide switch ‘service’ at the SCC unit to OFF.
2.
Press ‘LT’ button.
!
The changer starts an initialisation run. After this the jukebox is ready to operate.
Summary of Contents for OMT F91
Page 1: ...R ONE MORE TIME CD K 99 F 91 20 ...
Page 42: ...OMT CD Stand 13 08 2007 40 Notes ...
Page 43: ......
