Wurlitzer OMT F91, Operating Instructions Manual

Page: 14 / 44

The control terminal at the rear
OMT CD – Edition: 13.08.2007
12
5 Volume, sound and balance control - amplifier F91
ATTENTION! Depending on adjusted volume of the jukebox noise levels of more than 70 dB
can be reached.
5.1 The control terminal at the rear
With the control terminal at the rear side of the
jukebox the volume, treble, bass and balance can be
controlled individually.
After power up or if no button has been pressed for
approx. 5 sec or after the button PRESET has been
pressed, the terminal stays in the mode "VOLUME".
The LED "VOLUME" lights. In this mode you can
control the volume by means of the buttons '+' and '-'.
One LED corresponds to each mode. All modes are
accessible by pressing the ‘mode’ button. With the
buttons '+' and '-' treble, bass or balance can be
controlled.
The control terminal can be taken out and be used
as a wired remote control.
The meanings of the buttons...
"
MODE: Switches to the next operating mode.
After about 5 seconds without operating any
buttons, ‘volume’ mode is resumed.
"
PRESET: Volume, bass, treble, and balance are
set to the pre-set according to DIP switch setting.
Actual mode is set to ‘Volume’.
"
CANCEL: Rejects a playing track. If album play is
selected the next track will be played.
"
MUTE: As long as this button is activated, the
amplifier output is muted.
MODE
PRESET
CANCEL MUTE
0039661
VOLUME
BASS
TREBLE
BALANCE
-
+
+/-
+/-
+/-
+/-
VOLUME
BASS
TREBLE
BALANCE
Press button MODE
Press button MODE
Press button MODE
Press button MODE
LED Volume
lights
LED Bass
lights
LED Treble
lights
LED Balance
lights
current
mode