Start position for BGM CDs and configuration
OMT CD – Edition: 13.08.2007
30
9.2
Start position for BGM CDs and configuration
Press button 8. The start position of the BGM CDs is displayed in the left two digits. The RH digits
indicate whether BGM CDs can be selected over coin insertion or not.
A = start position of BGM CDs (01 = factory pre-setting)
B = 00 - BGM CDs can be selected
B = 01 - BGM CDs can NOT be selected
After entering this data the SCC unit calculates the BGM end
position itself. For loading of BGM discs the end position can be
calculated as follows:
end position = start po number of BGM CDs - 1
To reprogramme
press selection button 8 - hold - and press selection button R. The digital display
goes dark. Enter start position and the selection option with 4 digits!
9.3
BGM time zones at different weekdays
You can programme each weekday differently with two intervals per day. The following steps are
the same for the buttons 1 to 6 in service level 3 according to the table for weekdays..
1.
Press button 0, the display shows flashing:
#
0 (LH) = Sunday
#
1 means start time one,
then the time will be displayed, here 9.00 o’clock.
0 = Sunday
4 = Thursday
1 = Monday
5 = Friday
2 = Tuesday
6 = Saturday
3 = Wednesday
A
B
Summary of Contents for OMT F91
Page 1: ...R ONE MORE TIME CD K 99 F 91 20 ...
Page 42: ...OMT CD Stand 13 08 2007 40 Notes ...
Page 43: ......
