manualshive.com logo in svg

Wurlitzer OMT F91, Operating Instructions Manual

Share
Download
Wurlitzer OMT F91 Operating Instructions Manual Download Page 29

Programming start and stop time

OMT CD  –  Edition: 13.08.2007

27

press selection button 8. The display shows at first a flashing ’1’. 

This means ’start time’.

Then the time will be displayed, here 14.05 o’clock (2.05 p.m.).

Press selection button 8 once again. Now the display shows a flashing ’2’.

This means ’stop time’.

Then the time will be displayed, here 18.30 o’clock (6.30 p.m.).

To reprogramme press selection button 8 - hold - and press selection button R. Release both

buttons. The digital display goes dark. Enter the start and stop time with eight digits.

Example: The jukebox should play random tracks from 09.00 in the morning to17.00 in the

afternoon..

To check the start time: press selection button 8. To check the stop time: press selection button 8

again.

If the Playstimulator does not work. Check if:

"

the clock is set correctly ?

"

start and stop time is programmed?

"

repeat time is set correctly (not 0)?

"

BGM play mode is disabled (ref. to next chapter). 

"

credits are still in memory. Display the remaining credits by pressing button R. If so, delete with

button LT. 

Enter:

0 - 9 - 0 - 0 - 1 - 7 - 0 - 0
start time

stop time

Summary of Contents for OMT F91













































Reviews:

No comments

Brands by name

Popular brands

Load more brands