Oxi 3310 IDS (Oxi 3315)
Settings
ba75944e02
10/2014
37
6.3
Reset
You can reset (initialize) all sensor settings and sensor-independent settings
separately from each other.
6.3.1 Resetting the measurement settings
Dissolved oxygen
The following settings for D.O. measurements are reset to the default settings
with the
Reset
function:
The sensor settings are reset under the
Reset
menu item in the menu for cali-
bration and measurement settings. To open the settings, display the required
measured parameter in the measured value display and press the
<ENTER>
key.
6.3.2 Resetting the system settings
The following system settings can be reset to the default condition:
The calibration data are reset to the default settings together with
the measuring parameters. Recalibrate after performing a reset.
Setting
Default settings
Calibration interval
180 d
Check interval
60 d
Measured parameter
D.O. concentration
Relative slope (S
Rel
)
1,00
Salinity (value)
0,0
Salinity (function)
Off
Setting
Default settings
Language
English
Audio signal
on
Baud rate
4800 Baud
Output format
ASCII
Decimal separator
.
Contrast
50 %
Illumination
Auto
Shutoff time
1 h
Temperature unit
°C
Stability control
on
