Operation
Oxi 3310 IDS (Oxi 3315)
18
ba75944e02
10/2014
4.4
Navigation
4.4.1 Operating modes
4.4.2 Measured value display
In the measured value display, you can
open the menu for calibration and measurement settings with
<ENTER>
(short keystroke)
<ENTER_>
open the
Storage & config
menu with the sensor-independent
settings by pressing
<ENTER>
(long keystroke, approx. 2 s).
change the display in the selected measuring screen (e. g. pH <-> mV) by
pressing
<M>
.
change the display in the measurement window by pressing
<M>
(e.g. D.O.
concentration ->D.O. saturation ->D.O. partial pressure ->).
4.4.3 Menus and dialogs
The menus for settings and dialogs in procedures contain further subelements.
The selection is made with the
<
><
>
keys. The current selection is dis-
played with a frame.
Submenus
The name of the submenu is displayed at the upper edge of the frame. Sub-
menus are opened by confirming with
<ENTER>
. Example:
Operating mode
Explanation
Measuring
The measurement data of the connected sensor are
shown in the measured value display
Calibration
The course of a calibration with calibration information,
functions and settings is displayed
Storing in
memory
The meter stores measuring data automatically or man-
ually
Transmitting
data
The meter transmits measuring data and calibration
records to a USB-B interface automatically or manually.
Setting
The system menu or a sensor menu with submenus,
settings and functions is displayed
