Parameterization
pH 170/
pH 296
143
Setting the parameters for limit indicators
Example:
Set up the upper limit for “pH“ on relay 1.
−
Press the ENTER key to enter the
PL
submenu.
UL
pH
REL1
−
Press the ENTER key again to set this
limiting value.
The first/second/third or fourth numeral flashes.
−
Use the UP / DOWN keys to set the
numeral (flashing) of the limiting value and
confirm it by pressing the ENTER key.
−
Set the other numerals in the same way.
−
Confirm the last numeral using the ENTER
key and the
HS
submenu appears.
−
Use the UP / DOWN keys to set the first
numeral (flashing) of the hysteresis.
−
Press the ENTER key to confirm the input.
−
Set the both other numerals in the same
way.
Setting range: 0 to 10 % from the measuring
range.
−
Confirm the last numeral using the ENTER
key and the
td
submenu appears
.
