Parameterization
pH 170/
pH 296
139
Calling up the parameterization level
Calling up the parameterization level from the measuring mode
−
Press the DOWN key.
−
Press the ENTER key.
The first numeral flashes.
No code number is set in the delivery state.
To access the configuration level
−
press the ENTER key 3 times.
If a code number was already set in an earlier
parameterization, proceed as follows:
−
Set the first numeral using the UP / DOWN
keys.
−
Press ENTER to confirm the input.
−
Set the other two numerals in the same way.
−
The display shows
PA
.
Calling up the parameterization level from the configuration mode
Press ENTER when the configuration is finished.
The following display appears.
−
Use the UP / DOWN keys to change to the
parameterization level.
−
Press the ENTER key to confirm the input.
If an incorrect code is entered or the ESCAPE key pressed, access to the
parameterization is made in view mode. That is to say, settings can be
checked but not changed.