MIQ/CR3; DIQ/CR3
Settings
4 - 1
ba64107e08
05/2006
4
Settings
The combi output module has three relays outputs and three current
outputs.
!
Relay outputs operate as openers or closers.
!
Current outputs provide a current that depends on the measured
value.
On the terminal or Universal Transmitter, you can
!
assign names to the outputs (with the 184 XT and 2020 XT system
only, see section 4.2).
!
link outputs with sensors (see section 4.3)
!
delete links of outputs with sensors (see section 4.4)
!
adjust outputs (see section 4.5 and section 4.6)
!
check the condition of the outputs (see section 4.7)
Basic information on how to use relay outputs is given in section 4.1.
Note
The general operating principles are given in the relevant system
operating manual or in the component operating manual of the terminal
components.
Functions of current and
relay outputs
Relay output (see section 4.5
!
System monitoring
!
Sensor monitoring
!
Limit indicator
!
Frequency output
!
Pulse-width output
!
Cleaning
!
Sensor-controlled
!
Manual control
!
Alarm contact
(with the 184 XT and 2020 XT systems only)
Current output (see section 4.6
)
!
Recorder
!
PID controller
!
Fixed current value
Oxley Creek WWTP Water Reclamation (WTW - ba64107e08_xIQ_CR3) Vendor Manual
Doc Id: VM20
Owner: Howard Witten
Active Date: 15/12/2006
