Settings
MIQ/CR3; DIQ/CR3
4 - 18
ba64107e08
05/2006
!
The sensor is being calibrated
!
The sensor is in the maintenance condition
!
The sensor is being cleaned with the aid of a valve module in the
system (compressed air operated cleaning system).
4.5.3
Sensor monitoring
Function
The
Sensor monitoring
function enables to monitor sensor errors and
the maintenance condition.
In order to set up the
Sensor monitoring
function for a relay output, the
relay output must be linked with a sensor (see section 4.3).
Settings
Note
Preferably set up the relay output as opener for monitoring functions
(
Action
Open
, see section 4.5.1).
Sensor messages include errors and information that are registered by
the sensor.
Special
sensor errors
The special sensor errors are sensor-dependent. Details of this are
given in the component operating manual of the respective sensor.
Setting
Selection
Explanation
Errors
Special
Special sensor errors are
monitored and can prompt a
relay action.
All
All sensor errors (special ones
and general ones) are
monitored and can prompt a
relay action.
Off
Sensor errors are not
monitored.
Mainten. Condition
On
Off
Switching on and off the
maintenance condition (see
section 4.9) is monitored and
can prompt a relay action.
Action
Open
Close
Relay action (see section 4.5.1)
Oxley Creek WWTP Water Reclamation (WTW - ba64107e08_xIQ_CR3) Vendor Manual
Doc Id: VM20
Owner: Howard Witten
Active Date: 15/12/2006
