MIQ/CR3; DIQ/CR3
Settings
4 - 37
ba64107e08
05/2006
4.7
Checking the status of the outputs
This function offers a simple overview of the states of all outputs of the
combi output module.
For relays, the status
open
or
closed
is displayed.
For current outputs, the current value available at the output is
displayed.
With the System 182 XT, you can recall the states of the outputs via the
measured value and status display (see system operating manual of
the DIQ/S 182 XT).
With the 184 XT and 2020 XT systems, the function,
Status of output
channels
, in the menu,
Einstellungen/Settings
/
Service
/
List of all
components
can be accessed as follows:
Fig. 4-20 Status of output channels
1
Call up the measured value display with
m
.
2
Open the
Einstellungen/Settings
menu with
s
.
3
Highlight the
Service
menu item with
d
and confirm with
g
.
The
Service
dialog box opens.
4
Highlight the
List of all components
menu item with
d
and
confirm with
g
.
The
List of all components
dialog box opens.
5
Select the required component (column
Model
, entry
MIQCR3
)
with
d
and confirm with
g
.
The
Status of output channels
window opens.
6
Using
m
or
e
, exit the
Status of output channels
window.
Oxley Creek WWTP Water Reclamation (WTW - ba64107e08_xIQ_CR3) Vendor Manual
Doc Id: VM20
Owner: Howard Witten
Active Date: 15/12/2006
