3-12
MT5634 Modem; AT Command Set
Command: %DC
n
AT Command Control
Values:
n
= 0 or 1
Default:
0
Description:
%DC0 The modem responds to AT commands.
%DC1 The modem ignores AT commands.
Note:
The modem will respond to
AT%DC
for 10 seconds
after power-up.
Command: %E
n
Fallback and Fall Forward Control
Values:
n
= 0, 1, or 2
Default:
2
Description:
%E0 Disable fallback and fall forward.
%E1 Enable fallback, disable fall forward.
%E2 Enable fallback and fall forward.
Command: %H
n
Direct Connect Enable
Values:
n
= 0, 1
Default:
0
Description:
%H0 Sets callback security to normal operation.
%H1 All callback security calls will be direct connect
regardless of whether the password or phone number
has the
-
character.
Command: %R
n
Cisco Configuration
Values:
n
= 0, 1
Default:
0
Description:
%R0 Disables Cisco configuration.
%R1 Sets
E0
,
Q1
,
&D0
,
\N0
,
$SB9600
, and
%S1
for
operation with a Cisco router.
Command: %S
n
Command Speed Response
Values:
n
= 0, 1
Default:
0
Description:
%S0 Sets modem to respond to AT commands at all
normal speeds.
%S1 AT commands accepted at 115200 bps only.
Commands at other speeds are ignored.
Command: $D
n
DTR Dialing
Values:
n
= 0 or 1
Default:
0
Description:
$D0
Disables DTR dialing.
$D1
Dials the number in memory location 0 when
DTR goes high.
Summary of Contents for MT5634
