WTI MT5634, User Manual

Page: 31 / 36

6-1
6. Remote Configuration and
Country Code Configuration
6.1. Remote Configuration
Remote configuration is a network management tool that allows you to
configure modems anywhere in your network from one location. With
password-protected remote configuration, you can issue AT commands to a
remote modem for maintenance or troubleshooting as if you were on-site.
6.1.1. Basic Procedure
The following steps are valid regardless of whether the connection is
established by the local or the remote modem.
1. Establish a data connection with a remote modem.
2. Send three remote configuration escape characters followed by
AT and
the setup password and press [Enter] .
• Example: %%%ATMTSMODEM .
• You have four tries to enter the correct password before being
disconnected. If the password is correct, the remote modem responds
with OK .
3. You can now send AT commands to configure the remote modem.
4. When you have finished configuring the remote modem, save the new
configuration by typing AT&W0 . Press [Enter] .
5. Type
ATO
. Press
[Enter]
to exit remote configuration. You can now
break the connection.
6.1.2. Setup
MT5634 Modems are shipped with a default setup password (MTSMODEM).
Because anyone who has the User Guide knows the default setup password,
you should change the password and possibly also the remote configuration
escape character.