background image

3-15

AT Commands

Command:  #CBF?  Callback Failed Attempts Display

Values: 

 

N/A

Default: 

 

N/A

Description:   

Requests the number of failed callback passwords since reset  

 

 

or power-up. This number can be stored to nonvolatile memory  

 

 

using the &W command. 

Command:  #CBFR  Callback Failed Attempts Reset

Values: 

 

N/A

Default: 

 

N/A

Description:   

Resets the number of failed callback passwords to 0. This does  

 

 

not reset the number stored in nonvolatile memory. 

Command:  #CBI

n

  Local Callback Inactivity Timer

Values: 

 

n

 = 1–255

Default: 

 

20

Description:   

Sets the time (in minutes) that the modem waits for a command  

 

 

before forcing the user to enter the setup password again.

Command:  #CBN

y

=

x

  

 

 

Store Callback Password 

Values: 

 

y

 = 0–29

 

 

x

 = password

Defaults: 

 

None

Description:   

Sets the callback security password for the y memory location.  

 

 

The password must have 6 to 10 characters, and cannot include  

 

 

the + or - ¬characters.

Command:  #CBP

n

  Callback Parity

Values: 

 

n

 = 0, 1, or 2

Default: 

 

0

Description:   

Sets parity for the callback security messages. 

 

 

#CBP0  No parity.

 

 

#CBP1  Odd parity.

 

 

#CBP2  Even parity.

Command:  #CBR

y

  Callback Security Reset 

Values: 

 

y

 = 0–29

Default: 

 

None

Description:   

Clears the password and phone number in the y memory location. 

Summary of Contents for MT5634





































Reviews: