WTI MT5634, User Manual

Page: 8 / 36

2-2
MT5634 Modem; AT Command Set
Command Description
\B n Transmit Break
\K n Break Control
\N n Error Correction Mode Selection
\Q
n
Flow Control Selection
\T n Inactivity Timer
\V n Protocol Result Code
-C n Data Calling Tone
%A n Adaptive Answer Result Code Enable
%B View Numbers in Blacklist
%C
n
Data Compression Control
%DC n AT Command Control
%E n Fallback and Fall Forward Control
%H n Direct Connect Enable
%R n Cisco Configuration
%S n Command Speed Response
$EB n Asynchronous Word Length
$D n DTR Dialing
$MB n Online BPS Speed
$SB n Serial Port Baud Rate
#CBA n Callback Attempts
#CBD
n
Callback Delay
# CBF? Callback Failed Attempts Display
# CBFR Callback Failed Attempts Reset
# CBI n Local Callback Inactivity Timer
# CBN y = n Store Callback Password
# CBP n Callback Parity
# CBR y Callback Security Reset
# CBS
n
Callback Enable/Disable
#P n Set 11-bit Parity
#S x Enter Setup Password
#S= x Store Setup Password
+VDR= x , y Distinctive Ring Report
+++AT<CR> Escape Sequence
%%%ATMTSMODEM<CR> Remote Configuration Escape Sequence