Original Operating Instructions
BATx0280-ES-1-400-1 (Outdoor)
Maintenance
O_BATx0280-ES-1-400-1_(Outdoor)_V1.3_GB
Page
59
of
69
7.1
Maintenance every 12 Month
NOTICE: During each maintenance interval, the following points must be checked.
Table 7: Maintenance in de-energized condition (every 12 months)
Maintenance Tasks
See
Section 7.2.1
Visual Inspection of Interior Area
Section 7.2.2
Cleaning of Cooling Air Inlet and Cooling Air Outlet
Section 7.2.3
Torque Check of Electrical Connections
Section 7.2.4
Condition Check of Cables and Lines
Section 7.2.5
Section 7.2.6
Functional Test of DC Circuit Breaker
Section 7.2.7
Functional Test of AC Circuit Breaker
Section 7.2.8
Functional Test of Enable Switch
Section 7.2.9
7.2
Maintenance in De-energized Condition
7.2.1 Visual Inspection of Housing
Maintenance Tasks:
1.
Check
the housing for visual defects e.g. corrosion, discoloration or damages.
In case of visual defects,
repair
these immediately.
2.
Check
if any labels e.g. safety signs and type plates on the housing are
damaged or missing (Figure 4, Figure 5).
In case of damaged or missing labels,
contact
customer service.
7.2.2 Visual Inspection of Interior Area
Maintenance Tasks:
1.
Check
the interior area for dust and water accumulation.
In case of dust and water accumulation,
remove
it from the interior area.
2.
Check
parts for discoloration or damage.
In case of discoloration or damage,
contact
customer service.
7.2.3 Cleaning of Cooling Air Inlet and Cooling Air Outlet
Maintenance Tasks:
1.
See
Section 6.1.1.
Summary of Contents for BAT 0280-ES-1-400-1 Series
Page 69: ......
