WPI APOLLO 4000, Instruction Manual

Page: 22 / 74

APOLLO 4000
OPERATING INSTRUCTIONS
WORLD PRECISION INSTRUMENTS B-12
Adding a note: To add a short note to a trace while recording, switch the
operating mode from “PLOT” to “ANALYZE” (see page B-10). The data is still
recorded in the background although the new incoming data is not plotted. Right-
click a point on the trace where you want the Note to be added (see Fig. B22 ).
This will create a
mark at that place.
Double-click the
created mark. A Note
window will open
where a message of
up to 64 characters can be typed in (see Fig. B23 ). After the message is entered,
close the window. The mark will remain on the trace and can be double-clicked for
later viewing. Switch to “PLOT” to observe the data as they are being recorded.
To remove a mark from a trace, delete the message from the Note window. When
the Note window is closed, the Note mark will
disappear.
Fig. B22
Fig. B23