8x8 HDMI 2.0 HDBaseT Matrix Switcher
45
8.3 RS232 Commands
When controlling the matrix, the serial port settings for all RS232 commands is:
Baud rate: 9600
Data bit: 8
Stop bit: 1
Parity bit: none
The matrix switcher can be controlled by sending the following RS232
commands:
8.3.1 System Setting
Command
Description
Command Example and
Feedback
PowerON.
Power on the system.
Power ON!
PowerOFF.
Power off the system.
Power OFF!
/*Name.
Report product name.
MUH88T-H2
/*Type.
Report product model.
HDBaseT Matrix
/^Version.
Report software version.
V1.0.0
CPLD:V1.0.0
VideoDriverVersion:V1.0.0
RST.
Reset to factory default.
Factory Default!
Lock.
Lock front panel buttons.
Front Panel Locked!
Unlock.
Unlock front panel buttons.
Front Panel UnLock!
GetGuiIP.
Report the GUI IP.
GUI_IP:192.168.0.178!
SetGuiIP:xxx.xxx.xx
x.xxx.
Set the GUI IP to xxx.xxx.xxx.xxx.
SetGuiIP:192.168.0.176.
SetGuiIP:192.168.0.176!
Baudrate115200.
Set the serial baud rate of matrix switcher to
115200.
Set Local RS232 Baudrate
Is 115200!
Baudrate57600.
Set the serial baud rate of matrix switcher to
57600.
Set Local RS232 Baudrate
Is 57600!
Baudrate38400.
Set the serial baud rate of matrix switcher to
38400.
Set Local RS232 Baudrate
Is 38400!
Baudrate19200.
Set the serial baud rate of matrix switcher to
19200
Set Local RS232 Baudrate
Is 19200!
Baudrate9600.
Set the serial baud rate of matrix switcher to
9600.
Set Local RS232 Baudrate
Is 9600!
PHDBTON.
Enable PoC of HDBT outputs for powering
HDBaseT receivers.
HDBT Power ON!
PHDBTOFF.
Disable PoC of HDBT outputs.
HDBT Power OFF!
STA_PHDBT.
Report the PoC status of HDBT outputs.
HDBT Power ON!
DS[XX]ON.
DS00ON.
