8x8 HDMI 2.0 HDBaseT Matrix Switcher
57
l
The “[X]=1~7” represents the baud rate of
third-party device.
[X]=1, the baud rate is 2400
[X]=2, the baud rate is 4800
[X]=3, the baud rate is 9600
[X]=4, the baud rate is 19200
[X]=5, the baud rate is 38400
[X]=6, the baud rate is 57600
[X]=7, the baud rate is 115200
l
The “[YY]=00” represents all HDBT
outputs.
l
The “[YY]=01~08” represents the HDBT
output 1~8.
“123456” to the far-end
third-party device.
The third-party device is
connected to the far-end
HDBaseT receiver of
connecting the HDBT
output 1 port.
[X]/[YY]:
xxx.
When power off the matrix switcher,
automatically send ASCII command “xxx” to
power off far-end third-party device.
l
xxx: ASCII string.
l
The “[X]=1~7” represents the baud rate of
third-party device.
[X]=1, the baud rate is 2400
[X]=2, the baud rate is 4800
[X]=3, the baud rate is 9600
[X]=4, the baud rate is 19200
[X]=5, the baud rate is 38400
[X]=6, the baud rate is 57600
[X]=7, the baud rate is 115200
l
The “[YY]=00” represents all HDBT
outputs.
l
The “[YY]=01~08” represents the HDBT
output 1~8.
3/01:123456.
When power off the matrix
switcher, automatically
send ASCII command
“123456” to the far-end
third-party device.
The third-party device is
connected to the far-end
HDBaseT receiver of
connecting the HDBT
output 1 port.
8.3.7 CEC Control
If the input sources, HDBaseT output devices and local HDMI output devices are
supports CEC, they can be controlled by sending the following command instead of IR
remote.
CEC[I/O][AA][BB][CC][DD].
l
The “
[I]
” represents the input port. The “
[O]
” represents the output port.
l
The “
[AA]
” represents the port number. The HDMI input ports are 01~08. The
