4K 4x4 HDBaseT Matrix with 3 Receivers
10
6.2 IR Pass-through Control
6.2.1 Control Far-end Device locally
Connect an IR receiver to
IR IN
port of the matrix; users can control far-end display via
its IR remote from local.
In that case, the IR signal is transferred via twisted pair. Only the corresponding
IR
OUT
port can emit control signals to the remote display.
See the figure below:
6.2.2 Control Local Device Remotely
Connect IR receiver(s) to
IR IN
ports
on far-end HDBT receiver(s), and IR emitter(s) to
IR OUT
ports of the matrix, and use the IR remote of local source to control the device
remotely.
l
One to One:
Connect an IR receiver to
IR IN
port on far-end HDBaseT receiver, and an IR
emitter to
IR OUT 1
port of the matrix. Use the IR remote of local source to control
the device remotely. See below:
HDMI 1
HDMI 2
HDMI 3
HDMI 4
1-HDBT
IR OUT
IR EYE
2-HDBT
SPDIF
4-HDMI
3-HDBT
DC 24V
TCP/IP
Rx
Tx
RS232
POWER
CONTROL
IR IN
OUTPUTS
INPUTS
1
2
3
4
1
2
3
L
R
1 2 3 4
ON DIP
EDID
On
Off
1
0
IR
Emitter
IR
Receiver
Blu Ray
-
Receiver
HDMI:
HDBaseT:
IR:
AUDIO:
RS232:
TCP/IP:
