4K 4x4 HDBaseT Matrix with 3 Receivers
6
⑤
OUTPUTS:
l
1~3-HDBT:
Three HDBaseT RJ45 outputs to connect the three HDBaseT
receivers.
l
4-HDMI:
One local HDMI port to connect a local display.
l
SPDIF:
A digital optical S/PDIF audio output.
l
L/R:
A stereo pair of analog RCA audio output jacks.
⑥
CONTROL:
l
TCP/IP:
RJ45 port to connect the control device (e.g. PC) to control the matrix
by GUI.
l
RS232:
3-pin terminal block to connect the RS232 control device (e.g. PC) or
a device to be controlled by RS232 commands.
l
EDID:
4-pin DIP switch for EDID setting.
⑦
POWER:
DC barrel connector for the power adapter connection.
3.3 Receiver Front and Rear Panel
①
HDMI Out:
Type-A female HDMI port to connect the display device.
②
IR IN:
3.5mm jack to connect the IR receiver for IR pass-through.
③
IR OUT:
3.5mm jack to connect the IR emitter for IR pass-through.
④
HDBT In:
RJ45 port to connect the
HDBT
output port of HDBaseT matrix by CATx
Ethernet cable. The
LINK LED
illuminates orange when there is a valid HDBaseT
link between the matrix and the receiver. The
HDCP LED
illuminates green when
the video contains HDCP content.
⑤
POWER LED:
The LED illuminates red when power is applied.
⑥
DC 24V:
DC barrel connector for the power adapter connection.
IR Out
IR In
HDMI Out
DC 24V
HDBT In
1
2
3
4
5
6
