4K 4x4 HDBaseT Matrix with 3 Receivers
8
5. Panel Control
5.1 Signal Switching
l
Repeatedly press the
OUTPUT
button on front panel to cycle through the various
inputs for the corresponding output.
l
Press and hold
PRESET RECALL
button 1~3 to save the current switching status to
the corresponding preset 1~3.
l
Press the
PRESET RECALL
button 1~3 to recall the saved preset 1~3.
5.2 EDID Setting
The Extended Display Identification Data (EDID) is used for the source device to
match its video resolution with the connected display. By default, the EDID of source
device is 1080P PCM 2CH. Meanwhile, since the displays with different capabilities
are connected to the matrix, the 4-pin DIP switch on the rear panel can be used to set
the EDID to a built-in fixed value. Use the following table to determine the setting for
the 4-pin DIP switch for specific video resolution and audio capabilities. The switch
represents “
0
” when in the lower (
Off
) position, and it represents “
1
” while putting the
switch in the upper (
On
) position.
Switch Status
Video Resolution
Audio Format
0000 (Default)
Enable RS232, GUI or IR remote EDID management.
0001
1080P
2CH
0010
1080P
Multi-CH
0011
4K@30Hz HD
2CH
0100
4K@30Hz HDR
Multi-CH
0101
4K@60Hz HDR
2CH
0110
4K@60Hz HDR
Multi-CH
0111
User-define
Note:
l
2CH: LPCM 2Ch.
l
Multi-CH: 8Ch LPCM, Dolby TrueHD, DTS-HD, Dolby Digital5.1, DTS 5.1, Dolby
Digital Plus.
