Chain saw
WG305E
20
Injecting grease to lubricate
a
Z
Y
kg
Z
Y
L
M
N
O
P
lubricating the guide bar sprocket
1. Clean the bar and sprocket
2. Using a grease gun, insert the tip of the gun into the
lubrication hole and inject grease until it appears at the
outside edge of the sprocket tip. (See Fig. P)
3. To rotate the sprocket release the chain brake and pull
the chain by hand until the ungreased side of the sprocket
is in line with the grease hole. Repeat the lubrication
procedure.
ENVIRONMENTAL PROTECTION
Waste electrical products must not be disposed
of with household waste. Please recycle where
facilities exist. Check with your local authorities or
retailer for recycling advice.
