KTD1020
/ English Instruction Manual
14
DTV
Connect cable to the TV socket on the rear of the radio.
If in a poor signal area, to improve picture quality, purchase and install a signal amplifier (not
supplied).
Tuning in digital TV
When the TV is switched on for the first time, the following screen will
appear, press the
▲▼
◀
▶
buttons to select your On Screen Display (OSD) language. Select
Auto Search and press the
OK
button.
Note:
You will not be able to select the country mode.
When this screen appears press the
▲
or
▼
buttons to select item,
press or buttons to select Country or channel.
Press the
OK
button to confirm the selection.
The auto tune will start and must not be interrupted once started.
When this screen appears, wait for the TV to tune your digital channels.
This may take a few minutes.
Once the auto search is completed, the TV will display the target
region setting. If more than one regional transmitter is available use
to select your primary region preference, then press
OK
, to leave
this menu press .
Please wait for channels to populate the list, there may be a small
delay as all channels are correctly allocated.
For your information HD channels are populated in the list from
channel 101 onwards.
Once the target region setting or Auto search is completed, the TV
will display the first available digital channel. All other available digital
channels will be displayed in the Channel List by pressing the
PROGRAM
button. For more information, please refer to other
sections of the user guide.
