KTD1020
/ English Instruction Manual
13
CD Program
1. Set the unit in Stop mode
2.
Press the “
PROGRAM
” button on the Remote Control. The display will show “T01 P01”
and “T01” flash.
3.
Choose with “
” or “
” or 0 to 9 on the Remote Control, the track which should be
programmed and confirm the track by pressing the “
PROGRAM
” button on the Remote
Control. Th
e display changes to “P02”.
4. To choose more tracks do step 3 again.
5. If all tracks are programmed press
the “
” button on the unit or Remote Control to start the
programmed playback.
Repeat one track
During playback press the “
REPEAT
” button on the Remote Control once to repeat playback of
the song you are listening to.
Repeat all tracks
During playback press the “
REPEAT
”
button on the Remote Control twice to repeat all songs
from the CD. To cancel the Repeat mode press the “
REPEAT
” button on the Remote Control
until all symbols in the display disappear.
SLEEP
To set the sleep timer, choose from Sleep OFF, 15mins, 30mins, 45mins, 60 or 90mins.
Once you select a sleep period, the system returns to the “System Menu” screen.
ALARM
There are two versatile wake-up alarms with snooze facility, and a
sleep function to turn the system off after a set period. Each alarm
can be set to start in a particular mode.
Select Alarm under System settings to set or change an alarm.
Select the alarm number (1 or 2) then configure the following parameters:
•
Enable: on/off, Frequency: Daily, Once, Weekends or Weekdays,
•
Time
•
Mode: Buzzer, CD, DAB,TV or FM,
•
Preset: Last listened, 1 - 40,
•
Volume: 0 - 32
To activate the new settings,
press the “Back” button after youre finished.
The screen shows active alarms with an icon at the bottom left.
