KTD1020
/ English Instruction Manual
12
Tips:
➢
If there is already an existing connection, press the “
PAIR
” button to re-activate the pairing
mode. The existing connection will be interrupted.
➢
The unit will also be disconnected when your device is moved beyond the operational
range.
➢
If you want to reconnect your device to this unit, place it within the operational range.
➢
If the device is moved beyond the operational range, when it is brought back, check if the
device is still connected to the unit.
➢
If the connection is lost, follow the above instructions to pair your device again to the unit.
Listen Music from your Bluetooth device
➢
If the connected Bluetooth device supports Advanced Audio Distribution Profile (A2DP), you
➢
If the device also supports Audio Video Remote Control Profile (AVRCP), you can use this
unit's remote control to play music stored on the device.
1. Pair your device with this unit.
2. Play music via your device (if it supports A2DP).
3. Use supplied remote control to control play (if it supports AVRCP).
➢
To pause/resume play, press the
“
” button.
➢
To skip to a track, press the “ ” or “ ” buttons.
Hands free calling
With an existing Bluetooth connection, you can accept incoming calls with the "
" button. The
call will now be made through the loudspeaker and the built-in microphone. To end the call,
press the "" button on the remote control or the "
BACK
" button on the device.
If the incoming call is to be rejected, press the "
" button on the remote control or the "
BACK
"
button on the device.
CD MODE
Improper operation can result in material damages!
Do not insert any recording media that deviate from the standard CD format (eg: mini-discs) into
the CD player. These may not be played and ejected correctly. Insert only one disc at a time
into the CD player.
1. Press
button on the unit
or “
SOURCE
” button on remote control repeatedly until “CD”
displayed to choose CD.
2. Put a disc (with printing side facing up) inside
.
The display will say “Loading” and the disc
functions will not work while the disc is loading.
The Playback will begin automatically once the table of contents is read. The display will
show “No Disc” when the unit is set to CD mode and there is no CD inside.
➢
To pause/resume playback of the CD, press the “
” button
➢
To switch to the next track, press the “
” button once
➢
To fast forward through a track, press and hold the “
”
button.
➢
To switch to the previous track, press the “
” button twice
➢
To fast backward through a track, press and hold “
” button.
➢
To stop CD playback, press the “
” button on the remote control.