AUDEMAT FM Probe 1.2.x User Manual
–
07/2021
Page 34
WorldCast Systems SAS - 20, avenue Neil Armstrong
–
33700 Merignac
–
Bordeaux Métropole (France)
+33 (0)5 57 928 928
–
–
www.worldcastsystems.com
Simply drag a station from the scan list
(1)
to the monitoring list
(2)
.
identifies monitored channels in the scan list.
Edit channel information (name and frequency) in the monitoring list.
Remove a channel from the monitoring list; all associated data (readings, alarms) is then deleted.
Monitored channels are immediately added to the left menu.
The number of receivers varies between 1 and 8 depending on purchased options. See section 1.2.1 for more
details.
Stations selected to be monitored must be assigned to any available receiver according to your needs:
The more stations are assigned to a given receiver, the less time will be spent to
monitor each stations. You may want to distribute stations across available
receivers.
As an alternative, you may use manually configure a channel
(3)
: click on
“Create
Manual
Channel”
, enter its name, select the receiver, enter its frequency and
click the Create button.
A manually configured channel is directly added to the monitoring list.
The audio output is available for any monitored station. Simply click and drag the desired station to enable the rear
panel analog outputs
(4)
. The audio output level can be adjusted directly on the web interface.
Configuration helpers
(3)
:
As we saw section 6.4.5, channels are configured individually after they have been selected to be monitored.
4
5
