AUDEMAT FM Probe 1.2.x User Manual
–
07/2021
Page 44
WorldCast Systems SAS - 20, avenue Neil Armstrong
–
33700 Merignac
–
Bordeaux Métropole (France)
+33 (0)5 57 928 928
–
–
www.worldcastsystems.com
o
Auth, no priv:
set authentication algorithm and password
o
Auth, priv:
set authentication and encryption algorithms and passwords
SNMP v3 passwords must include at least 8 characters which can only be alphanumerical.
SNMP manager settings:
The equipment enables multiple addresses to be configured for SNMP notifications. Any of the configured managers
can acknowledge traps.
The unit is compliant with SNMPv1 and SNMPv2c versions.
Notifications can be transmitted as SNMPv1, SNMPv2c or Inform
SNMPv2c type traps. Select the notification type for all traps of a
given manager
SNMPv1 and SNMPv2c type traps are sent n times (Number of
repeats) before they are deleted from the queue.
Case of Inform SNMPv2c type traps:
Inform SNMPv2c traps require manager acknowledgment.
A trap is sent n times (Number of repeats) and stored in a queue.
If the trap is acknowledged, it is deleted from the queue.
If the trap is not acknowledged, it will be sent up to m times (Max attempts) in a t delay (Ack timeout). After m tries,
the trap is deleted even if it has not been acknowledged.
The queue uses the FIFO principle. It the number of traps in the queue becomes too great, the oldest traps will be
deleted, even if they have not been acknowledged. The size of the queue is set on the SNMP Agent page (Max
pending traps).
Trap level configuration:
Set the severity level for each trap: critical, major or minor.
The traps vary depending on enabled options.
SNMP Action:
•
Trap sending test:
enables the user to carry out a test according to the trap settings.
•
Replay:
The user may replay traps that have not been acknowledged yet.
•
Delete
: The user may also delete pending traps that have not been acknowledged yet.
SMTP Server configuration:
Enter the SMTP server address server port, account information to enable sending of e-mail alerts. Ask your network
administrator for the SMTP parameters. Note that you must have a valid DNS setup if you want to use SMTP host
name. Otherwise you must use a numeric IP address xxx.xxx.xxx.xxx.
If a text address is set, the DNS must be configured so as to allow name resolution.
Make sure the gateway is correctly configured for the unit to be able to reach the SMTP
server (“Network” page).
SMTP Email configuration:
