![Worldcast Systems AUDEMAT FM PROBE User Manual Download Page 32](http://html1.mh-extra.com/html/worldcast-systems/audemat-fm-probe/audemat-fm-probe_user-manual_997860032.webp)
AUDEMAT FM Probe 1.2.x User Manual
–
07/2021
Page 32
WorldCast Systems SAS - 20, avenue Neil Armstrong
–
33700 Merignac
–
Bordeaux Métropole (France)
+33 (0)5 57 928 928
–
–
www.worldcastsystems.com
For these parameters, a small graph shows:
Last measurements
Alarm threshold(s)
Levels can be adjusted in the text box or graphically by clicking and dragging the alarm threshold line.
On the graphic, the line turns red when your mouse is on the right place to grab it.
If the values are out of range, the text zone is framed in red.
All levels are relative to the reference.
To update the reference to the current value, press the button ‘Update
Reference’.
3-
MPX level, MPX Power, Pilot level and stereo presence, Audio level, RDS level and presence, Aux level:
•
Check parameters and options as for the RF level
•
In the RDS levels section, manage the RDS error rate monitoring: enter the appearance and
disappearance error rate as well as the frame analysis.
4-
RDS identification:
•
Check parameters you want to monitor and the alarms you
want to send
o
PI: indicate the reference PI code(s)
o
PS: indicate the cod
e”
type (static or scrolling) and the
reference PS code(s)
With a static code, the PS must include exactly 8 characters. When
automatically retrieved, the Audemat FM Probe adds spaces to
complete the string if it is shorter. When entered manually, add
spaces if needed.
o
TA
o
PTY: indicate the reference PTY and the trigger type
(PTY changed or specific PTY)
o
AID: indicate the reference AID code
o
Update references as needed
5-
RDS parameters:
•
Check parameters you want to monitor and the alarms you
want to send
o
AF list (method A): give the list of alternative
frequencies
o
RDS clock: indicate the time offset threshold, and
notification triggers.
o
RDS groups: check applicable groups
o
EON TA
o
EON TA PI: indicate the reference
o
Update references as needed
6-
Watermarking:
•
Check parameters you want to monitor and the alarms you want to send
•
For monitoring watermark changes, indicate the reference ID (integer)