7. SYSTEM ASSEMBLY
7.2 HDMI Micro Video Output
The Workswell WIRIS system is equipped with a standard HDMI micro video output. It can be connected to any
wireless video link or a display with HDMI input that supports WIRIS Agro resolu on.
The default WIRIS Agro resolu on 1280x720 (also called HD or 720p). It is recommended to use a display with
16:9 aspect ra o.
Figure 7.3 – Connex wireless video link and DJI Lightbridge (not included)
The system can be connected to a wireless video link or a display using supplied lightweight HDMI cable.
7.3 RC Receiver
For interfacing with standard RC receivers, WIRIS Agro is equipped with a S.BUS input. The S.BUS input, commu-
nica ng control of mul ple servo inputs, allows user to control the system remotely during the ight.
The rst two virtual channels on the S.BUS func on as primary direc onal controls within the menus and allow
for complete control over the device. The addi onal channels allow binding of func on shortcuts which provide
quick, customizable access to various func ons; capture trigger, mode change and so forth.
It is recommended to use a joys ck for naviga on in system menu. If connected as recommended, then the
behavior of the joys ck is as shown on the following image.
Digital Input
Func on
1
Up/Down
2
OK/Cancel
3-4
Op onal (shorcuts)
More informa on about digital inputs can be found in sec on 8
Digital IO Ports
.
E-mail and Web
[email protected]
www.workswell.eu
Mobile:
+420 725 877 063
ID:
Reg. No.: 29048575
VAT No.: CZ29048575
Headquarters
U Albrechtova vrchu 12
155 00, Prague 13
Czech Republic
Revision 1.0.0 EN, 25
th
Oct, 2019
All pictures are only for illustra on.
Real values may vary.
13
