12. MAIN MENU (SETTINGS)
12.4 Capture
CAPTURE submenu allows user to manually capture images and record video, to manually trigger the CWSI shut-
ter calibra on (NUC), to set periodic series capture and to set the Geofencing Trigger func on.
CAPTURE menu consists of the following items:
CAPTURE - Captures an image or a series, depending on the PERIODIC IMAGE CAPTURE se ng.
RECORD - Starts and stops recording of video.
IMAGE CORRECTION (NUC) - manually triggers the shu er correc on of the CWSI camera.
PERIODIC IMAGE CAPTURE - either sets the period for automa c image capture or turns it o altogether.
GEOFENCING TRIGGER - Set the Geofencig ON or OFF.
CAPTURE START FLIGHT LEVEL - Set the al tude above ground to start automa c image capture.
CAPTURE STOP FLIGHT LEVEL - Set the al tude above ground to stop automa c image capture. This means
that the UAV must be between START and STOP to capture.
CAPTURE SPEED BELOW - Set maximum speed for capture.
GPS - Current GPS speed and al tude.
Figure 12.4 – Capture op ons.
Geofencig
Geofencing is a special mode of automa c image capture used for UAV autopilot sessions. The camera will
automa cally trigger capturing images when condi ons are met.
User can de ne in which al tude the camera should capture images with START and STOP FLIGHT LEVEL. The
image will be captured each me the UAV slows down below the se ng SPEED BELOW.
E-mail and Web
[email protected]
www.workswell.eu
Mobile:
+420 725 877 063
ID:
Reg. No.: 29048575
VAT No.: CZ29048575
Headquarters
U Albrechtova vrchu 12
155 00, Prague 13
Czech Republic
Revision 1.0.0 EN, 25
th
Oct, 2019
All pictures are only for illustra on.
Real values may vary.
39
