Assembly
3730 E. Southern Avenue, Phoenix, AZ 85040 USA
800-778-8779
Workhorseproducts.com
8
Step 1 (Continued): Leveling the dryer.
4. With the side of the dryer still lifted, tighten the bolt
and nut for the other leg.
5. At this point, only one side of the dryer will be
leveled. Just like steps 1-2, insert a bolt and nut
loosely into the “J”.
6. With two people lifting, let the bolt fall to the
bottom of the “J” and the third person tightens the nut
and bolt with a socket wrench and a wrench.
Insert the bolt and nut into the other side while the
dryer is still lifted. Tighten the last leg.
7. The dryer is leveled after all four legs
have been tightened. The bolt should be at
the bottom of the “J”, just like in the photo
above.
