Assembly
Step 4: Attaching the infeed.
Parts needed:
Infeed Arm
8 x Hex Boles (1/4-20 x 1/2”)
8 x Flat Washers
Tools needed:
7/16” Socket
Wrench
1. The infeed arm (without the belt motor) belongs on
the right side of the dryer. With another person, lift the
arm and slide it into the dryer while aligning the four
holes.
2. While still holding the infeed arm, thread a hex bolt
(1/4-20 x 1/2”) with a flat washer into all four of the
holes.
3. Tighten all four holes with a 7/16” socket wrench.
Repeat steps 1-3 for the other side of the arm on the
other side of the dryer.
3730 E. Southern Avenue, Phoenix, AZ 85040 USA
800-778-8779
Workhorseproducts.com
12
