7
view through pages. Press “Enter” key to confirm your selection. For example, if
you want to view Cue 1, choose Cue 1 then press the “Enter” key, LCD shows:
Cue 1 :
Ch001>12 80 00 30 00
Ch006>00 20 00 50 00
Ch011>00 00 00 FL 00
By the way, you can also obtain the same view display by inputting the
command: “Cue 1 view” on the LCD-display.
5.2.4 Fade / Time setting for Cues
Fade just means the duration of Cue channel level’s changing from the
current level to the appointed level, it ranges between 0~99 seconds. Time just
means the interval time between every two relevant Cues, it ranges between
1~99 seconds. When the Fade is set to 0 level, all other Cues will be stopped
after the present running Cue finished. And when the Cue is set in Loop mode,
the appointed Cues can be operated circularly.
For instance, after the Cue5 menu was displayed, input “Fade@10” and
press the “Enter” key to confirm your operation, LCD will show you :
Cue 5 :
Ch001>12 80 00 30 00
Cmd : Fade
@
10
Act : Fade=10
( That means the Fade of Cue5 is 10 seconds )
The relevant fade time can also be viewed. For example, under the Cue5 menu, input
Fade and press the “Enter” key, LCD will show you the Fade time on the Action line :
Cue 5 :
Ch001>12 80 00 30 00
Cmd : Fade
Act : Fade=10
And you can also see the Fade time by directly inputting “Cue5 Fade” on the LCD.
(The Time setting can be done in the same way like Fade setting.)
